My DIY pallet bar I made for in my Shed/Man Cave/Garage Bar.
When I built it I had to use a hand saw, A hammer and a whole heap of nails as I didn't have any tools at the time.
I did end up going and buying a sander for the top of the bar as sanding it all by hand did not intrigue me at all.
To try and explain how it was built, Pretty much I have a two pallet base a longer pallet for the main part of the bar and a standard size pallet for the side.
Another 3 or pallets i used for wood and pulled the apart and cut them up to go onto the front of the long pallet and give the front of the bar, and did the same along the side. The L frame gave it the stability and then once I stuck the bar top down it is solid as a rock.
The bar top is actually half of a flat pallet so I didnt need to do alot to get it on there, pretty much cut it in half stick it on, sand, Stain and varnish.
Over all I probably ended up spending about $30.00 on the bar, which was Nails, Varnish and stain. Got the pallets from the side of the road for free. So really just took a bit of effort and have a pallet bar. Now to the the rest of the wall etc